Geschwindigkeit via SATA1 Bus überprüfen

Diskutiere Geschwindigkeit via SATA1 Bus überprüfen im weitere Hardware Forum im Bereich Hardware Forum; Hallo Wie kann ich die Geschwindigkeit via SATA1 Bus überprüfen? Ich habe WIN 7 64-bit Professional installiert.
C

cccc

Threadstarter
Dabei seit
03.10.2003
Beiträge
927
Hallo

Wie kann ich die Geschwindigkeit via SATA1 Bus überprüfen?
Ich habe WIN 7 64-bit Professional installiert.
 
Zuletzt bearbeitet:
Slayer10061977

Slayer10061977

Dabei seit
31.10.2006
Beiträge
3.434
Ort
Lübeck
Hallo cccc!

Dazu bräuchte man mehr Info's zur eingesetzten Hardware! Insbesondere Chipsatz des Mainboards bzw. genaue Modell & Hersteller Bezeichnung!

Ansonsten kann man mit diversen HDD Benchmark Tools testen...
 
Zyndstoff

Zyndstoff

Dabei seit
26.10.2010
Beiträge
2.445
Alter
58
Ort
BERLIN
Ansonsten kann man mit diversen HDD Benchmark Tools testen...
Na ja - aber da erhält man eher die Geschwindigkeit des Flaschenhalses HDD als die des SATA-Bus, oder?
Wobei mir nicht ganz klar ist, wozu man die Busgeschwindigkeit wissen möchte - solange die theoretische maximale Geschwindigkeit höher ist als die der dranhängenden HDD ist die doch relativ wurscht.
 
C

cccc

Threadstarter
Dabei seit
03.10.2003
Beiträge
927
Hallo cccc!

Dazu bräuchte man mehr Info's zur eingesetzten Hardware! Insbesondere Chipsatz des Mainboards bzw. genaue Modell & Hersteller Bezeichnung!

Ansonsten kann man mit diversen HDD Benchmark Tools testen...
Meine Hardware:
Code:
01: None 00.0: 10105 BIOS
  [Created at bios.190]
  Unique ID: rdCR.lZF+r4EgHp4
  Hardware Class: bios
  BIOS Keyboard LED Status:
    Scroll Lock: off
    Num Lock: on
    Caps Lock: off
  Serial Port 0: 0x3f8
  Parallel Port 0: 0x378
  Base Memory: 632 kB
  PnP BIOS: @@@0000
  BIOS: extended read supported
  MP spec rev 1.4 info:
    OEM id: "LENOVO"
    Product id: "THINKCEN"
    2 CPUs (0 disabled)
  BIOS32 Service Directory Entry: 0xfdbca
  SMBIOS Version: 2.5
  BIOS Info: #0
    Vendor: "LENOVO"
    Version: "2RKT38AUS"
    Date: "02/15/2008"
    Start Address: 0xe0be0
    ROM Size: 4096 kB
    Features: 0x0593001100000008da80
      PCI supported
      PnP supported
      BIOS flashable
      BIOS shadowing allowed
      ESCD supported
      CD boot supported
      EDD spec supported
      ACPI supported
      USB Legacy supported
      LS-120 boot supported
      Smart Battery supported
      BIOS Boot Spec supported
  System Info: #1
    Manufacturer: "LENOVO"
    Product: "6072A5G"
    Version: "ThinkCentre M57"
    Serial: "LMVFD79"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "LENOVO"
    Product: "LENOVO"
    Version: "NONE"
    Serial: "NONE"
    Type: 0x0a (Motherboard)
    Features: 0x09
      Hosting Board
      Replaceable
    Location: "INSIDE"
    Chassis: #3
  Chassis Info: #3
    Manufacturer: "LENOVO"
    Version: "NONE"
    Serial: "NONE"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x03 (Safe)
    Security Status: 0x03 (None)
  Processor Info: #4
    Socket: "LGA 775"
    Socket Type: 0x15 (Other)
    Socket Status: Populated
    Type: 0x03 (CPU)
    Family: 0xbe (Other)
    Manufacturer: "Intel"
    Version: "Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz"
    Processor ID: 0xbfebfbff000006fb
    Status: 0x01 (Enabled)
    Voltage: 1.8 V
    External Clock: 333 MHz
    Max. Speed: 3600 MHz
    Current Speed: 2300 MHz
    L1 Cache: #5
    L2 Cache: #6
  Cache Info: #5
    Designation: "L1 Cache"
    Level: L1
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Socketed)
    ECC: 0x02 (Unknown)
    Type: 0x02 (Unknown)
    Associativity: 0x02 (Unknown)
    Max. Size: 16 kB
    Current Size: 16 kB
    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
    Current SRAM Type: 0x0040 (Asynchronous)
  Cache Info: #6
    Designation: "L2 Cache"
    Level: L2
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Socketed)
    ECC: 0x02 (Unknown)
    Type: 0x02 (Unknown)
    Associativity: 0x02 (Unknown)
    Max. Size: 6144 kB
    Current Size: 4096 kB
    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
    Current SRAM Type: 0x0008 (Burst)
  Port Connector: #7
    Type: 0x09 (Serial Port 16550A Compatible)
    Internal Designator: "COM1"
    Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut])
    External Designator: "COM 1"
    External Connector: 0x08 (DB-9 pin male)
  Port Connector: #8
    Type: 0x09 (Serial Port 16550A Compatible)
    Internal Designator: "COM2"
    Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut])
    External Designator: "COM 2"
    External Connector: 0x08 (DB-9 pin male)
  Port Connector: #9
    Type: 0x05 (Parallel Port ECP/EPP)
    Internal Designator: "LPT1"
    Internal Connector: 0x19 (25 Pin Dual Inline [pin 26 cut])
    External Designator: "Parallel"
    External Connector: 0x05 (DB-25 pin female)
  Port Connector: #10
    Type: 0x10 (USB)
    Internal Designator: "4REARUSB/BOT"
    External Designator: "USB 1"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #11
    Type: 0x10 (USB)
    Internal Designator: "4REARUSB/MIDL"
    External Designator: "USB 2"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #12
    Type: 0x10 (USB)
    Internal Designator: "4REARUSB/MIDH"
    External Designator: "USB 3"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #13
    Type: 0x10 (USB)
    Internal Designator: "4REARUSB/TOP"
    External Designator: "USB 4"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #14
    Type: 0x10 (USB)
    Internal Designator: "2REARUSB/BOT"
    External Designator: "USB 5"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #15
    Type: 0x10 (USB)
    Internal Designator: "2REARUSB/TOP"
    External Designator: "USB 6"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #16
    Type: 0x10 (USB)
    Internal Designator: "USBHEADER/BOT"
    External Designator: "USB 7"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #17
    Type: 0x10 (USB)
    Internal Designator: "USBHEADER/TOP"
    External Designator: "USB 8"
    External Connector: 0x12 (Access Bus [USB])
  Port Connector: #18
    Type: 0x1d (Audio Port)
    External Designator: "Audio Line In"
    External Connector: 0x1f (Mini-jack [headphones])
  Port Connector: #19
    Type: 0x1d (Audio Port)
    External Designator: "Audio Line Out"
    External Connector: 0x1f (Mini-jack [headphones])
  Port Connector: #20
    Type: 0x1f (Network Port)
    Internal Designator: "J12"
    External Designator: "Network"
    External Connector: 0x0b (RJ-45)
  System Slot: #21
    Designation: "PCI Slot 1"
    Type: 0x06 (PCI)
    Bus Width: 0x05 (32 bit)
    Status: 0x03 (Available)
    Length: 0x04 (Long)
    Slot ID: 2
    Characteristics: 0x0104 (3.3 V, PME#)
  System Slot: #22
    Designation: "PCI Slot 2"
    Type: 0x06 (PCI)
    Bus Width: 0x05 (32 bit)
    Status: 0x03 (Available)
    Length: 0x04 (Long)
    Slot ID: 3
    Characteristics: 0x0104 (3.3 V, PME#)
  System Slot: #23
    Designation: "PCIE x16"
    Type: 0xa5 (Other)
    Bus Width: 0x0d (Other)
    Status: 0x02 (Unknown)
    Length: 0x04 (Long)
    Slot ID: 0
    Characteristics: 0x0004 (3.3 V)
  System Slot: #24
    Designation: "PCIE x1"
    Type: 0xa5 (Other)
    Bus Width: 0x08 (Other)
    Status: 0x02 (Unknown)
    Length: 0x04 (Long)
    Slot ID: 0
    Characteristics: 0x0004 (3.3 V)
  On Board Devices: #25
    Sound: "ADI" (disabled)
  On Board Devices: #26
    Ethernet: "BCM" (disabled)
  OEM Strings: #27
    BB:2R38A
  System Config Options (Jumpers & Switches) #28:
    JP 1: 1-2 Normal, 2-3 Clear CMOS/Boot Block Recovery
  Language Info: #29
    Languages: enUS
    Current: enUS
  Type 15 Record: #30
    Data 00: 0f 1d 1e 00 60 00 00 00 10 00 04 00 ce 00 00 00
    Data 10: 00 00 00 00 01 03 02 08 04 01 02 02 02
  Physical Memory Array: #31
    Use: 0x03 (System memory)
    Location: 0x03 (Motherboard)
    Slots: 4
    Max. Size: 8 GB
    ECC: 0x03 (None)
  Memory Device: #32
    Location: "J6G1"
    Bank: "DIMM 0"
    Manufacturer: "48spaces"
    Serial: "01234567"
    Asset Tag: "01234567"
    Part Number: "012345678901234567890123456789012345"
    Memory Array: #31
    Error Info: No Error
    Form Factor: 0x09 (DIMM)
    Type: 0x13 (Other)
    Type Detail: 0x0080 (Synchronous)
    Data Width: 0 bits
    Size: No Memory Installed
    Speed: 667 MHz
  Memory Device: #33
    Location: "J6G2"
    Bank: "DIMM 1"
    Manufacturer: "48spaces"
    Serial: "01234567"
    Asset Tag: "01234567"
    Part Number: "012345678901234567890123456789012345"
    Memory Array: #31
    Error Info: No Error
    Form Factor: 0x09 (DIMM)
    Type: 0x13 (Other)
    Type Detail: 0x0080 (Synchronous)
    Data Width: 0 bits
    Size: No Memory Installed
    Speed: 667 MHz
  Memory Device: #34
    Location: "J6H1"
    Bank: "DIMM 2"
    Manufacturer: "Samsung"
    Serial: "7925B512"
    Asset Tag: "33450733"
    Part Number: "4D332037385432393533455A332D43453620"
    Memory Array: #31
    Error Info: No Error
    Form Factor: 0x09 (DIMM)
    Type: 0x13 (Other)
    Type Detail: 0x0080 (Synchronous)
    Data Width: 42048 bits
    Size: 1 GB
    Speed: 667 MHz
  Memory Device: #35
    Location: "J6H2"
    Bank: "DIMM 3"
    Manufacturer: "Samsung"
    Serial: "7925B53F"
    Asset Tag: "33450733"
    Part Number: "4D332037385432393533455A332D43453620"
    Memory Array: #31
    Error Info: No Error
    Form Factor: 0x09 (DIMM)
    Type: 0x13 (Other)
    Type Detail: 0x0080 (Synchronous)
    Data Width: 42560 bits
    Size: 1 GB
    Speed: 667 MHz
  Memory Array Mapping: #36
    Memory Array: #31
    Partition Width: 2
    Start Address: 0x00000000
    End Address: 0x80000000
  Memory Device Mapping: #37
    Memory Device: #32
    Array Mapping: #36
    Start Address: 0x00000000
    End Address: 0x00000400
  Memory Device Mapping: #38
    Memory Device: #33
    Array Mapping: #36
    Start Address: 0x00000000
    End Address: 0x00000400
  Memory Device Mapping: #39
    Memory Device: #34
    Array Mapping: #36
    Start Address: 0x00000000
    End Address: 0x40000000
  Memory Device Mapping: #40
    Memory Device: #35
    Array Mapping: #36
    Start Address: 0x40000000
    End Address: 0x80000000
  Hardware Security: #41
    Power-on Password: 0x00 (Disabled)
    Keyboard Password: 0x00 (Disabled)
    Admin Password: 0x01 (Enabled)
    Front Panel Reset: 0x02 (Not Implemented)
  Type 32 Record: #42
    Data 00: 20 14 2a 00 00 00 00 00 00 00 00 01 02 03 04 05
    Data 10: 06 07 08 09
  Type 131 Record: #43
    Data 00: 83 40 2b 00 14 00 00 00 00 00 b0 29 00 00 00 00
    Data 10: f8 00 14 29 00 00 00 00 00 00 00 00 00 00 00 00
    Data 20: 00 00 00 00 01 00 01 21 c8 00 bd 10 00 00 00 00
    Data 30: 00 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00
  Inactive Record: #44
    Data 00: 7e 06 2c 00 01 01
  Type 131 Record: #45
    Data 00: 83 11 2d 00 01 02 03 ff ff 1f 00 00 00 00 00 02
    Data 10: 00
    String 1: "BOOTINF 20h"
    String 2: "BOOTDEV 21h"
    String 3: "KEYPTRS 23h"
  Type 131 Record: #46
    Data 00: 83 16 2e 00 01 00 00 00 00 00 00 00 00 00 00 00
    Data 10: 00 00 00 00 80 01
    String 1: "TVT-Enablement"
  Type 136 Record: #47
    Data 00: 88 06 2f 00 5a 5a
  Type 129 Record: #48
    Data 00: 81 08 30 00 01 01 02 01
    String 1: "Intel_ASF"
    String 2: "Intel_ASF_001"
  Type 130 Record: #49
    Data 00: 82 14 31 00 24 41 4d 54 01 00 00 00 00 a5 00 00
    Data 10: 00 00 00 00
  Config Status: cfg=new, avail=yes, need=no, active=unknown

02: None 00.0: 10107 System
  [Created at sys.63]
  Unique ID: rdCR.n_7QNeEnh23
  Hardware Class: system
  Model: "System"
  Formfactor: "desktop"
  Driver Info #0:
    Driver Status: thermal,fan are not active
    Driver Activation Cmd: "modprobe thermal; modprobe fan"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

03: None 00.0: 10104 FPU
  [Created at misc.192]
  Unique ID: rdCR.EMpH5pjcahD
  Hardware Class: unknown
  Model: "FPU"
  I/O Ports: 0xf0-0xff (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

04: None 00.0: 0801 DMA controller (8237)
  [Created at misc.206]
  Unique ID: rdCR.f5u1ucRm+H9
  Hardware Class: unknown
  Model: "DMA controller"
  I/O Ports: 0x00-0x1f (rw)
  I/O Ports: 0xc0-0xdf (rw)
  I/O Ports: 0x80-0x8f (rw)
  DMA: 4
  Config Status: cfg=new, avail=yes, need=no, active=unknown

05: None 00.0: 0800 PIC (8259)
  [Created at misc.219]
  Unique ID: rdCR.8uRK7LxiIA2
  Hardware Class: unknown
  Model: "PIC"
  I/O Ports: 0x20-0x21 (rw)
  I/O Ports: 0xa0-0xa1 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

06: None 00.0: 0802 Timer (8254)
  [Created at misc.230]
  Unique ID: rdCR.AJKleuxpiP0
  Hardware Class: unknown
  Model: "Timer"
  IRQ: 0 (49 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

07: None 00.0: 0900 Keyboard controller
  [Created at misc.251]
  Unique ID: rdCR.9N+EecqykME
  Hardware Class: unknown
  Model: "Keyboard controller"
  I/O Port: 0x60 (rw)
  I/O Port: 0x64 (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

08: None 00.0: 0701 Parallel controller (SPP)
  [Created at misc.262]
  Unique ID: YMnp.ecK7NLYWZ5D
  Hardware Class: unknown
  Model: "Parallel controller"
  Device File: /dev/lp0
  Device Files: /dev/lp0, /dev/char/6:0
  I/O Ports: 0x378-0x37a (rw)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

09: None 00.0: 0102 Floppy disk controller
  [Created at misc.282]
  Unique ID: rdCR.3wRL2_g4d2B
  Hardware Class: storage
  Model: "Floppy disk controller"
  I/O Port: 0x3f2 (rw)
  I/O Ports: 0x3f4-0x3f5 (rw)
  I/O Port: 0x3f7 (rw)
  DMA: 2
  IRQ: 6 (3 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

10: None 00.0: 10400 PS/2 Controller
  [Created at misc.304]
  Unique ID: rdCR.DziBbWO85o5
  Hardware Class: unknown
  Model: "PS/2 Controller"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

13: None 00.0: 10102 Main Memory
  [Created at memory.61]
  Unique ID: rdCR.CxwsZFjVASF
  Hardware Class: memory
  Model: "Main Memory"
  Memory Range: 0x00000000-0x7dff1fff (rw)
  Memory Size: 2 GB
  Config Status: cfg=new, avail=yes, need=no, active=unknown

14: PCI 00.0: 0600 Host bridge
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_29b0
  Unique ID: qLht.qrQRMfS8Cq3
  SysFS ID: /devices/pci0000:00/0000:00:00.0
  SysFS BusID: 0000:00:00.0
  Hardware Class: bridge
  Model: "Intel 82Q35 Express DRAM Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x29b0 "82Q35 Express DRAM Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "agpgart-intel"
  Module Alias: "pci:v00008086d000029B0sv000017AAsd00003038bc06sc00i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

15: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_29b2
  Unique ID: _Znp.pDfBnz+ow+F
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel Q35"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x29b2 "Q35"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "i915"
  Driver Modules: "drm"
  Memory Range: 0xd0100000-0xd017ffff (rw,non-prefetchable)
  I/O Ports: 0x1c70-0x1c77 (rw)
  Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable)
  Memory Range: 0xd0000000-0xd00fffff (rw,non-prefetchable)
  IRQ: 25 (3508 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d000029B2sv000017AAsd00003038bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: intel
  Driver Info #1:
    XFree86 v4 Server Module: intel
    3D Support: yes
    Extensions: dri
  Config Status: cfg=new, avail=yes, need=no, active=unknown

16: PCI 19.0: 0200 Ethernet controller
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_10bd
  Unique ID: rBUF.Sg2344QnwS0
  SysFS ID: /devices/pci0000:00/0000:00:19.0
  SysFS BusID: 0000:00:19.0
  Hardware Class: network
  Model: "Intel 82566DM-2 Gigabit Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x10bd "82566DM-2 Gigabit Network Connection"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "e1000e"
  Driver Modules: "e1000e"
  Device File: eth0
  Memory Range: 0xd0180000-0xd019ffff (rw,non-prefetchable)
  Memory Range: 0xd01a5000-0xd01a5fff (rw,non-prefetchable)
  I/O Ports: 0x1820-0x183f (rw)
  IRQ: 24 (25931 events)
  HW Address: 00:1e:37:36:8f:c2
  Link detected: yes
  Module Alias: "pci:v00008086d000010BDsv000017AAsd00003038bc02sc00i00"
  Driver Info #0:
    Driver Status: e1000e is active
    Driver Activation Cmd: "modprobe e1000e"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

17: PCI 1a.0: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2937
  Unique ID: pwJ7.4GsPbL+pDF8
  SysFS ID: /devices/pci0000:00/0000:00:1a.0
  SysFS BusID: 0000:00:1a.0
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #4"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1840-0x185f (rw)
  IRQ: 16 (42158 events)
  Module Alias: "pci:v00008086d00002937sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

18: PCI 1a.1: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2938
  Unique ID: gFpy.bgo94w6Xld8
  SysFS ID: /devices/pci0000:00/0000:00:1a.1
  SysFS BusID: 0000:00:1a.1
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #5"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1860-0x187f (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d00002938sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

19: PCI 1a.2: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2939
  Unique ID: XaIo.65lvYUEEH09
  SysFS ID: /devices/pci0000:00/0000:00:1a.2
  SysFS BusID: 0000:00:1a.2
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #6"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2939 "82801I (ICH9 Family) USB UHCI Controller #6"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x1880-0x189f (rw)
  IRQ: 18 (no events)
  Module Alias: "pci:v00008086d00002939sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

20: PCI 1a.7: 0c03 USB Controller (EHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_293c
  Unique ID: sClz.9LALHG46O+E
  SysFS ID: /devices/pci0000:00/0000:00:1a.7
  SysFS BusID: 0000:00:1a.7
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xd03a6800-0xd03a6bff (rw,non-prefetchable)
  IRQ: 18 (no events)
  Module Alias: "pci:v00008086d0000293Csv000017AAsd00003038bc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

21: PCI 1b.0: 0403 Audio device
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_293e
  Unique ID: u1Nb.ZH1Lr8gmNN9
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Intel 82801I (ICH9 Family) HD Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xd01a0000-0xd01a3fff (rw,non-prefetchable)
  IRQ: 16 (42158 events)
  Module Alias: "pci:v00008086d0000293Esv000017AAsd00003038bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

22: PCI 1d.0: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2934
  Unique ID: 1GTX.X01A9iIUeW8
  SysFS ID: /devices/pci0000:00/0000:00:1d.0
  SysFS BusID: 0000:00:1d.0
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x18a0-0x18bf (rw)
  IRQ: 16 (42158 events)
  Module Alias: "pci:v00008086d00002934sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

23: PCI 1d.1: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2935
  Unique ID: vayM.2RzvdGQBAv8
  SysFS ID: /devices/pci0000:00/0000:00:1d.1
  SysFS BusID: 0000:00:1d.1
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x18c0-0x18df (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d00002935sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

24: PCI 1d.2: 0c03 USB Controller (UHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2936
  Unique ID: mvRC.Zrvf6rXuhH9
  SysFS ID: /devices/pci0000:00/0000:00:1d.2
  SysFS BusID: 0000:00:1d.2
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x18e0-0x18ff (rw)
  IRQ: 18 (no events)
  Module Alias: "pci:v00008086d00002936sv000017AAsd00003038bc0Csc03i00"
  Driver Info #0:
    Driver Status: uhci-hcd is active
    Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

25: PCI 1d.7: 0c03 USB Controller (EHCI)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_293a
  Unique ID: 5YuN.7WHrJ7rhKEE
  SysFS ID: /devices/pci0000:00/0000:00:1d.7
  SysFS BusID: 0000:00:1d.7
  Hardware Class: usb controller
  Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xd03a6c00-0xd03a6fff (rw,non-prefetchable)
  IRQ: 16 (42158 events)
  Module Alias: "pci:v00008086d0000293Asv000017AAsd00003038bc0Csc03i20"
  Driver Info #0:
    Driver Status: ehci-hcd is active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

26: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_244e
  Unique ID: 6NW+.two+GgbUMg7
  SysFS ID: /devices/pci0000:00/0000:00:1e.0
  SysFS BusID: 0000:00:1e.0
  Hardware Class: bridge
  Model: "Intel 82801 PCI Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x244e "82801 PCI Bridge"
  Revision: 0x92
  Module Alias: "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i01"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

27: PCI 1f.0: 0601 ISA bridge
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2914
  Unique ID: BUZT.vQcHAKo5kG6
  SysFS ID: /devices/pci0000:00/0000:00:1f.0
  SysFS BusID: 0000:00:1f.0
  Hardware Class: bridge
  Model: "Intel 82801IO (ICH9DO) LPC Interface Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2914 "82801IO (ICH9DO) LPC Interface Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Module Alias: "pci:v00008086d00002914sv000017AAsd00003038bc06sc01i00"
  Driver Info #0:
    Driver Status: iTCO_wdt is not active
    Driver Activation Cmd: "modprobe iTCO_wdt"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

28: PCI 1f.2: 0101 IDE interface
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2920
  Unique ID: w7Y8.Au965k9aO+6
  SysFS ID: /devices/pci0000:00/0000:00:1f.2
  SysFS BusID: 0000:00:1f.2
  Hardware Class: storage
  Model: "Intel 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2920 "82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0x1c40-0x1c4f (rw)
  I/O Ports: 0x1c30-0x1c3f (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d00002920sv000017AAsd00003038bc01sc01i8a"
  Driver Info #0:
    Driver Status: ata_piix is active
    Driver Activation Cmd: "modprobe ata_piix"
  Driver Info #1:
    Driver Status: ata_generic is active
    Driver Activation Cmd: "modprobe ata_generic"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

29: PCI 1f.3: 0c05 SMBus
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2930
  Unique ID: nS1_.Vn7blzqmxD5
  SysFS ID: /devices/pci0000:00/0000:00:1f.3
  SysFS BusID: 0000:00:1f.3
  Hardware Class: unknown
  Model: "Intel 82801I (ICH9 Family) SMBus Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2930 "82801I (ICH9 Family) SMBus Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "i801_smbus"
  Driver Modules: "i2c_i801"
  Memory Range: 0xd03a7000-0xd03a70ff (rw,non-prefetchable)
  I/O Ports: 0x1c00-0x1c1f (rw)
  IRQ: 17 (no events)
  Module Alias: "pci:v00008086d00002930sv000017AAsd00003038bc0Csc05i00"
  Driver Info #0:
    Driver Status: i2c_i801 is active
    Driver Activation Cmd: "modprobe i2c_i801"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

30: PCI 1f.5: 0101 IDE interface
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2926
  Unique ID: W60f.BR0mgnooqi5
  SysFS ID: /devices/pci0000:00/0000:00:1f.5
  SysFS BusID: 0000:00:1f.5
  Hardware Class: storage
  Model: "Intel 82801I (ICH9 Family) 2 port SATA IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2926 "82801I (ICH9 Family) 2 port SATA IDE Controller"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x3038 
  Revision: 0x02
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x1cc0-0x1cc7 (rw)
  I/O Ports: 0x1cb4-0x1cb7 (rw)
  I/O Ports: 0x1cb8-0x1cbf (rw)
  I/O Ports: 0x1cb0-0x1cb3 (rw)
  I/O Ports: 0x1c60-0x1c6f (rw)
  I/O Ports: 0x1c50-0x1c5f (rw)
  IRQ: 18 (no events)
  Module Alias: "pci:v00008086d00002926sv000017AAsd00003038bc01sc01i85"
  Driver Info #0:
    Driver Status: ata_piix is active
    Driver Activation Cmd: "modprobe ata_piix"
  Driver Info #1:
    Driver Status: ata_generic is active
    Driver Activation Cmd: "modprobe ata_generic"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

31: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
  Unique ID: z9pp.QBqTp8zQt87
  SysFS ID: /devices/pnp0/00:00
  SysFS BusID: 00:00
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0a03 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

32: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
  Unique ID: QL3u.B+yZ9Ve8gC1
  SysFS ID: /devices/pnp0/00:01
  SysFS BusID: 00:01
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c02 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

33: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
  Unique ID: tWJy.ld94kxNGZf5
  SysFS ID: /devices/pnp0/00:02
  SysFS BusID: 00:02
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0200 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

34: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
  Unique ID: KiZ0.DE8RM9cWQQ8
  SysFS ID: /devices/pnp0/00:03
  SysFS BusID: 00:03
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c04 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

35: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0103
  Unique ID: ntp4.fG36JLVNse9
  SysFS ID: /devices/pnp0/00:04
  SysFS BusID: 00:04
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0103 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

36: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
  Unique ID: E349.WYwRElrJa93
  SysFS ID: /devices/pnp0/00:05
  SysFS BusID: 00:05
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0b00 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

37: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
  Unique ID: hEKD.bvKf3UMzZfE
  SysFS ID: /devices/pnp0/00:06
  SysFS BusID: 00:06
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0800 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

38: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_INT0800
  Unique ID: NhVi.jDhFyyFrbg5
  SysFS ID: /devices/pnp0/00:07
  SysFS BusID: 00:07
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: INT 
  SubDevice: eisa 0x0800 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

39: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
  Unique ID: qslm.BuKI+1soRmD
  SysFS ID: /devices/pnp0/00:08
  SysFS BusID: 00:08
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0501 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

40: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
  Unique ID: H20r.yhTOLOXWEq7
  SysFS ID: /devices/pnp0/00:09
  SysFS BusID: 00:09
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0700 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

41: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0400
  Unique ID: iT2w.13ubA72AEK3
  SysFS ID: /devices/pnp0/00:0a
  SysFS BusID: 00:0a
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0400 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

42: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
  Unique ID: 9fI_.B+yZ9Ve8gC1
  SysFS ID: /devices/pnp0/00:0b
  SysFS BusID: 00:0b
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: PNP "PnP"
  SubDevice: eisa 0x0c02 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

43: ISA(PnP) 00.0: 0000 Unclassified device
  [Created at isapnp.142]
  UDI: /org/freedesktop/Hal/devices/pnp_WEC1000
  Unique ID: cqY2.pxoAx9+ZAo9
  SysFS ID: /devices/pnp0/00:0c
  SysFS BusID: 00:0c
  Hardware Class: unknown
  Model: "Unclassified device"
  SubVendor: WEC 
  SubDevice: eisa 0x1000 
  Config Status: cfg=new, avail=yes, need=no, active=unknown

44: None 00.0: 0700 Serial controller (16550)
  [Created at serial.74]
  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
  Unique ID: S_Uw.3fyvFV+mbWD
  Hardware Class: unknown
  Model: "16550A"
  Device: "16550A"
  Device File: /dev/ttyS0
  Device Files: /dev/ttyS0, /dev/char/4:64
  I/O Ports: 0x3f8-0x3ff (rw)
  IRQ: 4 (32 events)
  Config Status: cfg=new, avail=yes, need=no, active=unknown

45: SCSI 400.0: 10600 Disk
  [Created at block.243]
  UDI: /org/freedesktop/Hal/devices/storage_serial_Generic_Flash_Disk_877D9E2D_0_0
  Unique ID: Zj8l.Pk4WDkp5w8C
  Parent ID: 5YuN.7WHrJ7rhKEE
  SysFS ID: /class/block/sda
  SysFS BusID: 4:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/host4/target4:0:0/4:0:0:0
  Hardware Class: disk
  Model: "Generic Flash Disk"
  Vendor: usb 0x058f "Generic"
  Device: usb 0x6387 "Flash Disk"
  Revision: "8.07"
  Serial ID: "877D9E2D"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage"
  Device File: /dev/sda (/dev/sg0)
  Device Files: /dev/sda, /dev/block/8:0, /dev/disk/by-id/usb-Generic_Flash_Disk_877D9E2D-0:0, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0
  Device Number: block 8:0-8:15 (char 21:0)
  BIOS id: 0x80
  Features: Hotpluggable
  Geometry (Logical): CHS 1009/33/62
  Size: 2065920 sectors a 512 bytes
  Speed: 480 Mbps
  Geometry (BIOS EDD): CHS 16140/4/32
  Size (BIOS EDD): 2065920 sectors
  Geometry (BIOS Legacy): CHS 780/4/32
  Module Alias: "usb:v058Fp6387d0104dc00dsc00dp00ic08isc06ip50"
  Driver Info #0:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #25 (USB Controller)

46: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_98B3_6338
  Unique ID: bdUI.SE1wIdpsiiC
  Parent ID: Zj8l.Pk4WDkp5w8C
  SysFS ID: /class/block/sda/sda1
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda1
  Device Files: /dev/sda1, /dev/block/8:1, /dev/disk/by-id/usb-Generic_Flash_Disk_877D9E2D-0:0-part1, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0-part1, /dev/disk/by-uuid/98B3-6338, /dev/disk/by-label/DEBIAN_LIVE
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #45 (Disk)

47: None 00.0: 11300 Partition
  [Created at block.412]
  UDI: /org/freedesktop/Hal/devices/volume_uuid_4110fb27_4134_421d_9188_ec4f42cb4bac
  Unique ID: 2pkM.SE1wIdpsiiC
  Parent ID: Zj8l.Pk4WDkp5w8C
  SysFS ID: /class/block/sda/sda2
  Hardware Class: partition
  Model: "Partition"
  Device File: /dev/sda2
  Device Files: /dev/sda2, /dev/block/8:2, /dev/disk/by-id/usb-Generic_Flash_Disk_877D9E2D-0:0-part2, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0-part2, /dev/disk/by-uuid/4110fb27-4134-421d-9188-ec4f42cb4bac, /dev/disk/by-label/home-rw
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #45 (Disk)

48: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0
  Unique ID: k4bc.cO89g+iefn1
  Parent ID: sClz.9LALHG46O+E
  SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (USB Controller)

49: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
  Unique ID: pBe4.9T1GDCLyFd9
  Parent ID: 5YuN.7WHrJ7rhKEE
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #25 (USB Controller)

50: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0
  Unique ID: uIhY.MxUuepIFPaE
  Parent ID: pwJ7.4GsPbL+pDF8
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #17 (USB Controller)

51: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0
  Unique ID: zPk0.7gZT0a5zLs5
  Parent ID: gFpy.bgo94w6Xld8
  SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #18 (USB Controller)

52: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0
  Unique ID: 2XnU.uOe2OKugI8D
  Parent ID: XaIo.65lvYUEEH09
  SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
  SysFS BusID: 5-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

53: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
  Unique ID: 7eqy.v+N+B0xY+P6
  Parent ID: 1GTX.X01A9iIUeW8
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
  SysFS BusID: 6-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #22 (USB Controller)

54: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
  Unique ID: BSFT.gkSaZmjGyhD
  Parent ID: vayM.2RzvdGQBAv8
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
  SysFS BusID: 7-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (USB Controller)

55: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
  Unique ID: FZIx.RTX9xWW_uz4
  Parent ID: mvRC.Zrvf6rXuhH9
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
  SysFS BusID: 8-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.32-5-686 uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.32-5-686 uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #24 (USB Controller)

57: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_413c_1002_noserial_if0
  Unique ID: ZmS7.m9pYc3P2Z30
  Parent ID: 7eqy.v+N+B0xY+P6
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0
  SysFS BusID: 6-1:1.0
  Hardware Class: hub
  Model: "Dell Keyboard Hub"
  Hotplug: USB
  Vendor: usb 0x413c "Dell Computer Corp."
  Device: usb 0x1002 "Keyboard Hub"
  Revision: "2.00"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v413Cp1002d0200dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #53 (Hub)

58: USB 00.0: 10800 Keyboard
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_413c_2002_noserial_if0_logicaldev_input
  Unique ID: 93B0._LIse2efm43
  Parent ID: ZmS7.m9pYc3P2Z30
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0
  SysFS BusID: 6-1.1:1.0
  Hardware Class: keyboard
  Model: "Dell SK-8125 Keyboard"
  Hotplug: USB
  Vendor: usb 0x413c "Dell Computer Corp."
  Device: usb 0x2002 "SK-8125 Keyboard"
  Revision: "2.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event0
  Device Files: /dev/input/event0, /dev/char/13:64, /dev/input/by-id/usb-Dell_Dell_USB_Keyboard_Hub-event-kbd, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.0-event-kbd
  Device Number: char 13:64
  Speed: 12 Mbps
  Module Alias: "usb:v413Cp2002d0200dc00dsc00dp00ic03isc01ip01"
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #57 (Hub)

59: USB 00.1: 0000 Unclassified device
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_413c_2002_noserial_if1_logicaldev_input
  Unique ID: cER4.jSN00bRFh7D
  Parent ID: ZmS7.m9pYc3P2Z30
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1
  SysFS BusID: 6-1.1:1.1
  Hardware Class: unknown
  Model: "Dell SK-8125 Keyboard"
  Hotplug: USB
  Vendor: usb 0x413c "Dell Computer Corp."
  Device: usb 0x2002 "SK-8125 Keyboard"
  Revision: "2.00"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/event1
  Device Files: /dev/input/event1, /dev/char/13:65, /dev/input/by-id/usb-Dell_Dell_USB_Keyboard_Hub-event-if01, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.1:1.1-event
  Device Number: char 13:65
  Speed: 12 Mbps
  Module Alias: "usb:v413Cp2002d0200dc00dsc00dp00ic03isc00ip00"
  Driver Info #0:
    Driver Status: usbhid is active
    Driver Activation Cmd: "modprobe usbhid"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #57 (Hub)

60: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_46d_c00c_noserial_if0
  Unique ID: 1KRL.H0U+lKw3oFD
  Parent ID: ZmS7.m9pYc3P2Z30
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0
  SysFS BusID: 6-1.3:1.0
  Hardware Class: mouse
  Model: "Logitech Optical Wheel Mouse"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0xc00c "Optical Wheel Mouse"
  Revision: "21.10"
  Compatible to: int 0x0210 0x0013
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/char/13:66, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-mouse, /dev/char/13:32, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-mouse, /dev/char/13:63
  Device Number: char 13:63 (char 13:32)
  Speed: 1.5 Mbps
  Module Alias: "usb:v046DpC00Cd2110dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    Buttons: 3
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #57 (Hub)

61: None 00.0: 10103 CPU
  [Created at cpu.304]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perfmon,pebs,bts,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,v
  Clock: 2325 MHz
  BogoMips: 4655.51
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

62: None 01.0: 10103 CPU
  [Created at cpu.304]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: Intel
  Vendor: "GenuineIntel"
  Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,constant_tsc,arch_perfmon,pebs,bts,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,v
  Clock: 2325 MHz
  BogoMips: 4654.99
  Cache: 4096 kb
  Units/Processor: 2
  Config Status: cfg=new, avail=yes, need=no, active=unknown

63: None 00.0: 10700 Loopback
  [Created at net.124]
  Unique ID: ZsBS.GQNx7L4uPNA
  SysFS ID: /class/net/lo
  Hardware Class: network interface
  Model: "Loopback network interface"
  Device File: lo
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown

64: None 00.0: 10701 Ethernet
  [Created at net.124]
  Unique ID: usDW.ndpeucax6V1
  Parent ID: rBUF.Sg2344QnwS0
  SysFS ID: /class/net/eth0
  SysFS Device Link: /devices/pci0000:00/0000:00:19.0
  Hardware Class: network interface
  Model: "Ethernet network interface"
  Driver: "e1000e"
  Driver Modules: "e1000e"
  Device File: eth0
  HW Address: 00:1e:37:36:8f:c2
  Link detected: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (Ethernet controller)
 
Zuletzt bearbeitet:
webspider[GER]

webspider[GER]

Dabei seit
06.05.2006
Beiträge
2.408
Hallo

Wie kann ich die Geschwindigkeit von SATA-Bus überprüfen?
Ich habe WIN 7 64-bit Professional installiert.
wie Slayer10061977 und Zyndstoff schon geschrieben haben



Es gibt keinen weg ( mir nicht bekannt mit normalen Mitteln ) die Bus geschwindigkeit zu überprüfen aber

man kann die

die durchschnittliche Transferrate der Festplatte anzeigen lassen

existieren dann 2x SATA : Bei parallelen Bussen wird es bei höheren Übertragungsraten immer schwieriger, den Datenfluss auf allen Leitungen synchron zu halten bzw. das Übersprechen zwischen den einzelnen Leitungen in den Griff zu bekommen

abhängig vom Standard SATA 1( Serial ATA 1.5 Gbit/s ) SATA 2 (Serial ATA 3.0 Gbit/s)


Die Freeware
http://www.chip.de/downloads/HD-Tune_23932256.html
 
Zuletzt bearbeitet:
I

imaetz70

Dabei seit
07.12.2005
Beiträge
9.256
Alter
50
Ort
Hamburg
Meine Hardware:
Code:
BIOS32 Service Directory Entry: 0xfdbca
  SMBIOS Version: 2.5
  BIOS Info: #0
    Vendor: "LENOVO"
    Version: "2RKT38AUS"
    Date: "02/15/2008"
    Start Address: 0xe0be0
    ROM Size: 4096 kB
    Features: 0x0593001100000008da80
      PCI supported
      PnP supported
      BIOS flashable
      BIOS shadowing allowed
      ESCD supported
      CD boot supported
      EDD spec supported
      ACPI supported
      USB Legacy supported
      LS-120 boot supported
      Smart Battery supported
      BIOS Boot Spec supported
  System Info: #1
    Manufacturer: "LENOVO"
    Product: "6072A5G"
    Version: "ThinkCentre M57"
    Serial: "LMVFD79"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "LENOVO"
    Product: "LENOVO"
    Version: "NONE"
    Serial: "NONE"
    Type: 0x0a (Motherboard)
    Features: 0x09
      Hosting Board
      Replaceable
    Location: "INSIDE"
    Chassis: #3
  Chassis Info: #3
    Manufacturer: "LENOVO"
    Version: "NONE"
    Serial: "NONE"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x03 (Safe)
    Security Status: 0x03 (None)
  Processor Info: #4
    Socket: "LGA 775"
    Socket Type: 0x15 (Other)
    Socket Status: Populated
    Type: 0x03 (CPU)
    Family: 0xbe (Other)
    Manufacturer: "Intel"
    Version: "Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz"
    Processor ID: 0xbfebfbff000006fb
    Status: 0x01 (Enabled)
    Voltage: 1.8 V
    External Clock: 333 MHz
    Max. Speed: 3600 MHz
    Current Speed: 2300 MHz
    L1 Cache: #5
    L2 Cache: #6
sorry aber aus dieser auflistung lässt nichts ersehen, was du für hardware hast. man sieht nicht einmal was für ein SATA-standard die verbauten chips unterstützen..

am reinen BUS kannst du NICHTS testen. dafür muss mmer am anderen ende auch was dran hängen (HDD oder SSD), sonst wird das im leben nix..

zudem, der speed einer HDD/SSD ist auch abhängig von der eigenen größe und der größe der dateien, die man bewegen will..

außerdem wird hier noch unterschieden in LESEN und SCHREIBEN..

die BUS-infos der hersteller sagen nur aus, was MAXIMAL möglich wäre, aber das geht auch nur, wenn eine entsprechende andere Hardware, also HDD oder SSD am anderen ende angeschlossen wird..


PS: und wenn ich das richtig eben sah, wird dein ThinkCentre M57

in verschiedenen varianten gebaut, bzw. wurde gebaut..
 
Thema:

Geschwindigkeit via SATA1 Bus überprüfen

Geschwindigkeit via SATA1 Bus überprüfen - Ähnliche Themen

  • Fernsehen via DSL > Geschwindigkeit

    Fernsehen via DSL > Geschwindigkeit: Kann ich bei einem Download von 2 Mbit befriedigend IP Entertain sehen? Welche Geschwindigkeit sollte anliegen?
  • CPU Auslastung immer bei 100 % laut Task-Manager / CPU Geschwindigkeit bei über 29.000.000 Ghz ???

    CPU Auslastung immer bei 100 % laut Task-Manager / CPU Geschwindigkeit bei über 29.000.000 Ghz ???: Hallo, meine CPU-Auslastung wird im Task-Manager und Ressourcenmonitor immer auf 100% angezeigt. Bei Prozesse werden die Leistungen aufgeteilt...
  • Touchpad Scrollfunktion hat verschiedene Geschwindigkeiten

    Touchpad Scrollfunktion hat verschiedene Geschwindigkeiten: Hallo Kommunity, Ich habe eine Lenovo L340 mit dem aktuellen Windows 10. Alle Updates sind gemacht, alle Treiber geladen. Wenn ich im Netz...
  • Nach dem letzte Mai-update DSL-Geschwindigkeit nur noch ein drittel vo vrher

    Nach dem letzte Mai-update DSL-Geschwindigkeit nur noch ein drittel vo vrher: Nachdem ich das letzte Mai -update heruntergeladen habe, ist meine Internetgeschwindigkeit nur noch ungefähr ein Drittel. Ich habe nur noch 17...
  • Ähnliche Themen
  • Fernsehen via DSL > Geschwindigkeit

    Fernsehen via DSL > Geschwindigkeit: Kann ich bei einem Download von 2 Mbit befriedigend IP Entertain sehen? Welche Geschwindigkeit sollte anliegen?
  • CPU Auslastung immer bei 100 % laut Task-Manager / CPU Geschwindigkeit bei über 29.000.000 Ghz ???

    CPU Auslastung immer bei 100 % laut Task-Manager / CPU Geschwindigkeit bei über 29.000.000 Ghz ???: Hallo, meine CPU-Auslastung wird im Task-Manager und Ressourcenmonitor immer auf 100% angezeigt. Bei Prozesse werden die Leistungen aufgeteilt...
  • Touchpad Scrollfunktion hat verschiedene Geschwindigkeiten

    Touchpad Scrollfunktion hat verschiedene Geschwindigkeiten: Hallo Kommunity, Ich habe eine Lenovo L340 mit dem aktuellen Windows 10. Alle Updates sind gemacht, alle Treiber geladen. Wenn ich im Netz...
  • Nach dem letzte Mai-update DSL-Geschwindigkeit nur noch ein drittel vo vrher

    Nach dem letzte Mai-update DSL-Geschwindigkeit nur noch ein drittel vo vrher: Nachdem ich das letzte Mai -update heruntergeladen habe, ist meine Internetgeschwindigkeit nur noch ungefähr ein Drittel. Ich habe nur noch 17...
  • Oben